PS4 - manual & conf

[DrSpace]

Matlo & company,

I need support to get it working on my PS4 keyboard and mouse. In use a PS3 Version GIMX in windows without problems.
I followed the instructions and tried it from Ubuntu 13.10 on vmware normal and without success. The components I use are: sweex bluetooth micro adapter dongle class 1, teensy 2.0 and I have two controls DS4.

PS4 him to appear in a new DS4 but no way to activate it as the DS4 user console so it does not allow to use it. We could talk for mail and guide me.

Thanks!

[Matlo]

Running GIMX in a virtual machine is not officially supported, you should test it with a Live USB first.
Did you notice there is no GUI support yet?
You have to use the command-line as explained there: http://gimx.fr/wiki/index.php?title=PS4

[DrSpace]

Matlo,

I tested with Ubuntu 13.10 64bit version. I followed the Gui using the DEV version and MASTER, reaches 10.00ms message appears and gets stuck, I have seen - status arriving

should be associated as the same DS4? because a new one appears on the console but I have no way to enable the user to simulated or DS4 asociarlo.He git and updated. configuration xml (status 8)

[Matlo]

After starting gimx, did you turn on the DS4?

Please post the terminal output, it can help me understand what's going on.

Also note that your bt dongle does not have the same chip as in the tutorial (I'm not sure it can work with the PS4).

[DrSpace]

When you are at home data compiled BT dongle and pointed all the steps I do. The BT I use is one that is BlueCore4 chip and I think you mention.
My BT is ..
http://www.sweex.com/es/assortiment/con ... ers/BT214/

Inquiries:
- console must be active to start the whole process connected with some command? Run gimx once ... me has come out whether or not the query accept the connection is on hold but have to accept to use the asset DS4.
- should be sent as PS button or signal should apparate?
- There is some sample video?

Thanks,

as I said, all the data collected to provide the necessary information.

[Matlo]

The PS4 works differently, forget what you did with the PS3.
Just read the PS4 page of the wiki and follow the instructions.

[DrSpace]

The BT function should I use?

The steps I followed are these days. Tonight I will try to make a video and show the steps and point them to see where failure.

Thanks

[DrSpace]

Matlo,

I created the following videos with the steps I do, one of them gave me error that the device was in use.

To see if the video you can guide me I should do before or after, I do wrong.
I get to see the link by connecting teensy 2.0 to PS4 like a new DS4 but I can not bind properly to activate or use the keyboard.

thanks again and attached links created:

Part 1 - cfg ps4
http://youtu.be/PJ7RiqSehhY

Part 2 - cfg ps4
http://youtu.be/E0YbMh0KeBk

Teensy 2.0 -> firmware is http://gimx.fr/download/EMUPS4.7z


::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

COMMAND LINE - GIMX - http://gimx.fr/wiki/index.php?title=PS4

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Code: Select all

[sudo] password for unix: 
sudo: ./gimx-ps4-helper.sh: orden no encontrada
unix@iunix:~$ cd GIMX
unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh 
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.

Plug the bluetooth dongle.
The bluetooth dongle address is 00:15:xx:xx:30:6C.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:xx:xx:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:xx:xx:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:xx:xx:96:4E
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E 
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed
unix@iunix:~/GIMX$ gimx -t DS4 -c ../.emuclient/config/PS4_KillZoneShadowFall.xml -h 0 -b B0:05:xx:xx:96:4E
option -t with value `DS4'
option -c with value `../.emuclient/config/PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:xx:xx:96:4E'
bind: La dirección ya se está usando
Can't initialize btds4.
connector_init failed

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

[Matlo]

You forgot to type these commands before running gimx:

Code: Select all

sudo service bluetooth stop
sudo hciconfig hci0 up pscan

And you don't have to write the path to the config file, the file name is enough:

Code: Select all

gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E

[DrSpace]

I have several questions first, because I've tried and do not know if I do well.

DS4 should start and select on PS4 before starting the connection process?

DS4 I turn it off or perform some action after the process?


As I return to review and complete the steps.

Thanks,