Ok so I replaced the driver and now the command promt says
Serial_recv error
Spoof failed.
connector_init failed
GIMX 360 Help
-
Recognize12
- Posts: 7
- Joined: Tue Apr 15, 2014 4:31 pm
Re: GIMX 360 Help
I got it working thanks for all the help!
-
Kekskrümel
- Posts: 101
- Joined: Mon Nov 04, 2013 9:50 pm
Re: GIMX 360 Help
Getting same Error:
Serial_recv error
Spoof failed.
connector_init failed
What have you changed after switching the driver ?
The Adapter works fine with the PS3.
Serial_recv error
Spoof failed.
connector_init failed
What have you changed after switching the driver ?
The Adapter works fine with the PS3.
Re: GIMX 360 Help
This usually is the consequence of a wrong wiring.
The PS3 only needs 2 wires to be correct, and the Xbox360 needs the 3 wires to be correct.
The PS3 only needs 2 wires to be correct, and the Xbox360 needs the 3 wires to be correct.
GIMX creator
-
Kekskrümel
- Posts: 101
- Joined: Mon Nov 04, 2013 9:50 pm
Re: GIMX 360 Help
Its working if I switch the usb cable to port 2 on the xbox 360.
On port 1 (left port on the front) I get this error.
On port 1 (left port on the front) I get this error.