PS4 Joystick not Found

[EscapeThat]

Hi,
Im using the USB board and Windows for the PS4.

I load up the launcher after the PS4 is turned on and I see this: http://i.imgur.com/cocYouL.png

(Im not very good at this sort of thing), but there is no controls going being read by the PS4.

One of the problems I have is when I open up the config, this shows up: http://i.imgur.com/pCZfOjK.png

I think that the wiring is good.
I downloaded zadig and changed the driver for the "Wireless Controller" to libusbK.

Here is a screenshot of my devices if that helps: http://i.imgur.com/upxEFcn.png

Any help would be Great!

Thanks.


Edit: I did also install the Tenssy PS4 Drivers

[Matlo]

Hi,

Which AVR USB board and which USB to UART adapter are you using?
Where did you bought them?

Did you install the latest CP2102 drivers?

Maybe you have:
- a defective USB cable
- bad wires or bad soldering
- a defective AVR USB board
- a defective CP2102 board
- a voltage mismatch between the boards

[EscapeThat]

USB to UART: http://www.ebay.com/itm/1pc-USB-2-0-to- ... 1046646242

AVR USB board: The Teensy 2.0 :http://www.pjrc.com/store/teensy.html

I have installed the CP driver.

I swapped the cables but I still get the Sony joystick not found.

[Matlo]

I still get the Sony joystick not found.

This is not an error (blue exclamation mark = information message).
The error is not really obvious to see: the "serial_recv" line tells about a serial reception error.

I created a new issue: #295.

I will fix the error handling and upload a test setup so that you can get more details about the error.

[EscapeThat]

Alright thanks!

[Matlo]

Here it is: http://gimx.fr/download/b5dc966f74eb6f6 ... x86_64.exe

[EscapeThat]

When I run the launcher I get this: http://i.imgur.com/3AZC95w.png

[Matlo]

I uploaded a new setup (same link) with a longer (5s instead of 1s) reception timeout.
Please test it and report if it works or not.

[EscapeThat]

http://i.imgur.com/kAD6a2I.png Odd says no controller detected. Don't think that is a good thing...

[Matlo]

I think there's something wrong at the hardware level.
Please take a clear photo of your adapter and post it.