Using DS4 as a device within gimx config

[Matlo]

There is almost no change in the new 5.0 firmware.
Could you please double check that it doesn't work?

[onetymeohnly]

Ok after having spent several hours figuring out what worked and what doesn't work in my case is that gimx 4.3 with PS3/PS4 firmware 5.0 works, then after upgrading to gimx 5.0, PS3 firmware 5.0 works but not PS4 firmware 5.0. I get

detected usb adapter:ds4
libusb_init: entity not found
no controller was found on the usb buses
adapter_detect failed

when using gimx5/ps4-5. Tested on PS3/PS4

[Matlo]

Thanks for your tests. I'll investigate on this.

[Matlo]

Hi,
Could you please open a cmd terminal and type (copy-paste) the following commands:

Code: Select all

cd C:\Program Files\UsbDk Runtime Library
UsbDkController.exe -n

and then post the output?

[onetymeohnly]

Enumerate USB devices
Found 3 USB devices:
0. FilterID: 1, Port: 1, ID: 8087:8009, Configs: 1,
USB\VID_8087&PID_8009 1
Descriptor for configuration #0: size 25
1. FilterID: 2, Port: 1, ID: 8087:8001, Configs: 1,
USB\VID_8087&PID_8001 1
Descriptor for configuration #0: size 25
2. FilterID: 5, Port: 1, ID: 13fd:1340, Configs: 1,
USB\VID_13FD&PID_1340 57442D5743415257313236
Descriptor for configuration #0: size 32

[Matlo]

I forgot to tell you to connect the DS4 before typing the command.
Was the DS4 connected when you typed the command?

[onetymeohnly]

Enumerate USB devices
Found 3 USB devices:
0. FilterID: 1, Port: 1, ID: 8087:8009, Configs: 1, Speed: 3
USB\VID_8087&PID_8009 1
Descriptor for configuration #0: size 25
1. FilterID: 2, Port: 1, ID: 8087:8001, Configs: 1, Speed: 3
USB\VID_8087&PID_8001 1
Descriptor for configuration #0: size 25
2. FilterID: 5, Port: 1, ID: 13fd:1340, Configs: 1, Speed: 3
USB\VID_13FD&PID_1340 57442D574341525731323639
Descriptor for configuration #0: size 32

Edit: Sorry I realized I am doing this on GIMX 4.3. Should I be doing it in 5.0?

[Matlo]

Yes please do this after installing GIMX 5.0. Please also check that you still have the error, and post the entire GIMX output.

[onetymeohnly]

option -c with value 'Battlefield4.xml'
option -p with value 'COM3'
status flag is set
subpos flag is set
force_updates flag is set
Detected USB adapter: DS4.
libusb_init: Entity not found.
No controller was found on USB buses.
adapter_detect failed

Enumerate USB devices
Found 2 USB devices:
0. FilterID: 1, Port: 1, ID: 8087:8009, Configs: 1, Speed: 3
USB\VID_8087&PID_8009 1
Descriptor for configuration #0: size 25
1. FilterID: 5, Port: 1, ID: 13fd:1340, Configs: 1, Speed: 3
USB\VID_13FD&PID_1340 57442D574341525731323639
Descriptor for configuration #0: size 32

[Matlo]

Did you install GIMX x86_64 or i386?